NOSRAM ESC COMET EVO BRUSHLESS 9.5 T 3.7-7.4V 200A , BEC 6V 3A

Item Number: 02690960 Item code: 4250068148466 NOSRAM Comet Evo Brushless ESC from 9.5T

 With the purchase of an Evo or Nosram Nosram Comet Comet HD opt for a

brushless speed controller of the class. This control with all its high-tech

features and specially selected electronic components is the peak of today's brushless ESC dar.

IFMAR World Champion Technology! 

features:

• Pure Brushless Competition regulator 

• Integrated aluminum housing / heatsink design 

• Perfect for Modified AND Stock Racing 

• Fully adjustable with 7 modes 

• Bulletproof linear BEC 6V/3A 

• 125% faster microcontroller 

• LowResistance powerpcb U-solder tabs

• USB software Updatebarkeit In detail: user interface, as known from Nosram,

are quick and easy changes to the track without the aid a programming device is a

must and therefore we have our famous puzzle with 2 buttons and multiple LED's,

which retain display the correct function and fashion's.

 USB Software Updatebarkeit, 

be aware that the Comet with the latest USB Bridge Spec.2 ( can communicate # 02,692,501).

 By the sensor connector plug your controller can be updated to the latest software version

which is available on www.Nosram.com. The optional USB bridge and a computer are necessary,

please follow the instructions in the "USB Bridge" for exact procedure to update

software of the controller. 

mode programming,

 the Comet has 7 modes, which allow you to adjust it 100% adjust to your specific needs. 

Mode.1 automatic brake feel MODE.2 / Initial Drive Torque Timing MODE.3 MODE.4 boost timing

 Mode.5 boost angle and triggerMode.6 turbo timing Mode.7 cut-off 3-Way Protection System,

 informed It flashes on the bottom of the cut-off with a special LED sequence,#

the green SET led quickly to indicate an error and the MODE LED's show you the "error code"

(= default of shutdown). Special Features: • BOOST0 Racing: the blue LED flashes in the neutral

position to signal that all the timing is off for "True Stock Racing" as dictated by some associations. 

BOOST0 is enabled when set to +4 mode3 Value0 (then 5 +6 are fashion's not even visible!) 

• Linear BEC: 6V/3A was a powerful linear integrated, which ensures stable and smooth

power supply of the receiver and servo. Not even the strongest BEC is naturally immune

against faulty servo or fan, if you have ever problems with an unstable

Spanungsversorgung or unexpected receiver behavior, you should troubleshoot

let the power and the fan not be ignored!

 • 1S LiPo use: the Comet can be operated at lower voltages than 7.4V, but please be aware that

you then have a receiver battery or "RX booster" require the use of 1S LiPo or 4-cell NiMH because

the comet has no built-in voltage booster.

 • On / off switch : please read! The switch operates as "an active" which means that the controller

is different than most other regulators, switched when you remove the switch. The reason is that

if the switch is damaged in a crash, you can still take your run to the end. If you want to operate

the controller without switch, so that the controller is switched on as soon as you plug in the battery,

you must remove the switch and do not connect the two ends of the cable! If you are using 1S batteries

would always have off with receiver battery or BEC-booster and regulator, you should both ends of the

cable to connect to the controller to let off position. 

• Adaptive brake behavior: new revised X-Brake Pro with more direct and super- linear feeling! 

A good starting point for the brake setting on your radio is 80% for all classes. However, always

make sure that you make the controller / transmitter setup with 100% on your remote control! 

• Mode settings without the transmitter: At race events you usually do not have access to your transmitter. 

But which is no problem! For FM installations since you can simply disconnect the receiver lead and then you

can change the settings of the modes described in "Programming Mode". At 2.4GHz systems, you must not

unplug the receiver cable. 

• Factory settings: Nosram controllers are supplied factory (gray-shaded values ​​show the factory setting). 

If you loose track of the modes, it is possible to retrieve the Nosram factory settings. With the transmitter

switched on and hold the SET button while turning the knob. This returns the unit on the Nosram factory settings. 

• Lower engine temperatures: our further improved Kommutationsalgorithmus and further improved hardware

results in even lower engine temperatures than other controllers. 

• Fading Compensation: a special algorithm compensates that your car is fully

charged or partially discharged Battery feels different. 

• Power Capacitor: Never drive without power capacitor! It offers additional power and maximum

protection, it must be connected to BAT + and BAT Löttabs with the shortest possible cables.

 Specification: 

• Recommended for Motor Limit 7.4V: about 9.5T 

• Forward / Brake: Yes 

• Size: 32x34x21mm 

• Weight without Cable: 38g 

• Heatsink: yes • Voltage Range: 3.7V to 7.4V 

• Voltage Drop @ 20A per phase: 0.022V 

• Current carrying capacity per phase: 200A 

• Compatible winding modes: Star 

• Plug 30x30mm fan: optional 

• LinearBEC: 6.0V/3.0A 

• Boost 0 Mode: Yes 

• Power Cable: 3.3mm ²